Or you can contact us using the following information:

(021) 2001960 - Steenberg branch 22 Military Rd ( off main Rd above the railway line)

(021) 7055034 - Southfield Branch 118 Victoria Rd (at the bridge next to Werda butchery)

info@hireourtools.co.za

Brick cutter

 
 
 
                       Application:
 
 
  1.           A  simple  tough and effective tool for trimming,cutting  and splitting standard bricks.
  2.             Ideal for use  on diy  or commercial projects  ,its simple operation makes paving jobs easier.
  3.             High stability  ,lightweight and precise cutting ability.
 
 

.
                       Instructions and operating tips
 
  1. You might think that there’s nothing to the technique for cutting brick, if you’ve ever seen a builder taking a brick   in one hand and, with a bricklayers trowel in the other, look by eye and then strike the brick cutting it neatly exactly along the required line. 
  2.  However, even an experienced DIY enthusiast can find that technique for cutting bricks difficult, and a beginner will find in just about impossible. The experienced builder will have been doing it for years and will know exactly where the brick has a weakness to exploit. Not forgetting, of course, that different bricks themselves will require different techniques for cutting them.
 

                 Using a Chisel to Cut Bricks
 
 
  1. If you only need to occasionally cut bricks and lack the technique of a master builder, the same effect can be had by using a chisel and a hammer. Using a piece of chalk, mark a line around the brick where you want to cut it. Whilst any cold, or stone masons, chisel will do a bolster chisel is best as it has a longer edge to do the cutting. These are small, sturdy chisels with a handgrip on the shaft and a guard around the top to protect your hand.
  2. Don't forget to put on your safety glasses first. Using a point on the chisel edge, scour along the chalk line down, or across, at least two adjacent faces of the brick. This usually means across the back and down one of the edges. Position the brick so that the cutting edge is facing you and the part of the brick you want to use when it is cut nearest to you.  
  3. Placing the brick on a flat surface that’s harder than the brick, hit the chisel lightly along the scoured line for lightweight bricks or more heavily for concrete bricks; to create a cut or groove in the brick - then apply one heavy sharp blow along this groove to cut the brick in two. As you become more practised in this, you’ll be able to dispense with scouring a guide line for the chisel to ‘sit’ in as you hammer it and will come to you instinctively how hard to hit the chisel.
 

 
Trimming Rough Spots  
 
  1. This can be done with a bolster chisel and hammer, but is probably more easily done with a masons hammer. The advantage of using a mason’s hammer is that you can hold the brick in one hand whilst trimming it with the hammer in the other, whereas with a chisel and hammer you’ll need both hands to hold the tools.  rough spots off a brick is simply about making small blows to the rough spots with the chisel end of the Trimming mason’s hammer, until the rough spots are removed.