Or you can contact us using the following information:

(021) 2001960 - Steenberg branch 22 Military Rd ( off main Rd above the railway line)

(021) 7055034 - Southfield Branch 118 Victoria Rd (at the bridge next to Werda butchery)

info@hireourtools.co.za

Low Level Electric Submersible Pump

Low Level Electric Submersible PumpSubmersible pump low level

 
This pump is able to empty clean water to a minimum level of approximately 10mm 
Maximum delivery rate 11700 l/h
Maximum delivery height 8 m
 
submersible pump (or electric submersible pump (ESP)) is a device which has a hermetically sealed motor close-coupled to the pump body. The whole assembly is submerged in the fluid to be pumped. The main advantage of this type of pump is that it prevents pump cavitation, a problem associated with a high elevation difference between pump and the fluid surface. Submersible pumps push fluid to the surface as opposed to jet pumps having to pull fluids.
 

Reccomemdations

  • Pump must not run dry.
  • Do NOT use the pump anywhere near Sand as the machine has a plastic impellar which will become damaged by Sand.
  • No Stones - obviously - it is a clean water pump.
  • If the pump does not pump - turn sidways to release the airlock.
  • As these pumps are sealed units we are unable to make minor repairs - should you accidentally damage any part of the pump we will need to charge the full replacement cost.
  • Loose leaves at the bottom of swimming pools will clog and block the pump intake - when the pump flow becomes less clear the debris from the pump intake.
  • The float switch should always have free travel.
  • minimum water level for pump to opperate = 70mm

 Typical application areas

Drainage of containers,water tanks, swimming pools,soakaways and flooded rooms
 
Unspecified use:
the pump is NOT intended for:
  • pumping fluids at a temperature larger than 35ÂșC
  • Pumping drinking water or liquid food
  • pumping saltwater
  • pumping explosive,inflammable or aggresive substances
  • human waste
  • solvents
  • continuous circulation use (pond)

Specifications:

 Rated input power 550 W
 Mains voltage 230 V
 Maximum delivery rate 11700 l/h
 Maximum delivery height 8 m
 Maximum immersion depth 5 m
 Maximum pressure 0,95 bar
 Discharge port 1 1/4" FThr
 Pump housing: Plastic
 Power cable 10 m
 Weight 5 kg